12V 250A Solenoid Relay 63070 2875714 Fit for Smittybilt Winch XRC 2.0 3.0

Solenoid Relay for Smittybilt Winch

This 12V 250A Solenoid Relay is a replacement contactor for Smittybilt winches, using OEM cross-references 63070 and 2875714. It is specifically designed to fit Smittybilt XRC 2.0 and XRC 3.0 winch models.

Overview

This solenoid relay is a high-current switching unit that controls the winch motor's power from the battery. It is a direct replacement for the 63070 and 2875714 part numbers, which are commonly used on Smittybilt XRC 2.0 and 3.0 winches. This relay ensures reliable operation when you need to spool in or out under heavy load.

Built For Performance

• Rated for 250A continuous current to handle demanding winch loads
• Replaces both OEM part numbers 63070 and 2875714
• Heavy-duty contacts resist pitting and wear from frequent use
• 12V DC coil works with standard winch control systems
• Designed to survive harsh weather and off-road conditions

Fits These Machines

• for Smittybilt XRC 2.0
• for Smittybilt XRC 3.0
• for winches using the 63070 or 2875714 solenoid relay

On-The-Job Use

• Recovering a vehicle from a ditch or steep embankment
• Pulling a heavy load across flat terrain
• Operating the winch to clear a trail or move debris

Specs At A Glance

Good To Know

Q: Will this relay work with my Smittybilt XRC 2.0? A: Yes, this relay is a direct replacement for the 63070 and 2875714 contactors used on XRC 2.0 and 3.0 models. Check your existing relay's part number to confirm compatibility.

Q: Why does the winch relay fail over time? A: The high current draw from winching can cause contacts to arc and corrode, leading to intermittent operation. Replacing the relay restores full electrical flow to the motor.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.