Skip to product information
1 of 12

14411-AA881 Turbo For Subaru Forester WRX Legacy 2.0L MGT2259S 814306 FA20

14411-AA881 Turbo For Subaru Forester WRX Legacy 2.0L MGT2259S 814306 FA20

Regular price $395.99
Regular price Sale price $395.99
Sale Sold out
Quantity

Turbo for Subaru Forester WRX Legacy 2.0L MGT2259S 814306 FA20

This turbocharger replaces the factory unit on 2.0L Subaru FA20 engines, and it cross-references OEM number 14411-AA881 with the MGT2259S and 814306 designations.

Overview

This turbo is a direct-fit replacement for the factory blower on 2.0L Subaru FA20 engines in the Forester, WRX, and Legacy. It compresses intake air to restore boost pressure and factory power delivery, and the 14411-AA881 cross-reference helps confirm it matches your application. It is built for owners replacing a failed, oil-starved, or worn turbocharger.

Built For Performance

  • Cross-references OEM part number 14411-AA881
  • MGT2259S housing and wheel design matched to FA20 airflow demands
  • 814306 designation identifies the specific turbocharger build
  • Water and oil-cooled center housing for consistent temperature control
  • Internal wastegate and actuator assembly for boost regulation
  • Balanced rotating assembly for smooth spool and reduced vibration

Fits These Machines

  • for Subaru Forester 2.0L FA20 models
  • for Subaru WRX 2.0L FA20 models
  • for Subaru Legacy 2.0L FA20 models

On-The-Job Use

  • Replacing a failed or oil-starved factory turbo
  • Restoring factory boost and power on a daily-driven FA20 car
  • Rebuilding a top-end setup after bearing or seal failure
  • Getting a Forester, WRX, or Legacy back on the road after turbo damage

Specs At A Glance

Part Number(s) 14411-AA881
Turbo Model MGT2259S
Alternate ID 814306
Engine Fitment 2.0L FA20

Good To Know

Q: Do I need to replace the oil feed line when installing this turbo? A: Replacing the oil feed line and priming the center housing before start-up is strongly recommended to avoid starving the new bearings.

Q: Will this turbo require a tune after installation? A: An ECU reflash or tune is often needed to match boost targets and fueling, so check with your tuner before driving hard.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.

Get it between -

View full details