3/8" Magnetic Inline Automatic 3810000 Transmission Power Steering Filter Truck

3/8" Magnetic Inline Automatic Transmission Power Steering Filter for Truck

This 3/8" magnetic inline automatic transmission power steering filter, referencing OEM cross-reference 3810000, traps ferrous debris in the fluid line to protect pumps and valves. It is designed for trucks with 3/8" return or cooler lines, and its magnetic core also captures fine metal particles that standard screens miss.

Overview

This 3/8" magnetic inline automatic transmission power steering filter is a serviceable inline unit that installs directly into a 3/8" hose. It filters transmission or power steering fluid continuously while the engine runs, and it is built for truck applications where automatic transmission or power steering system protection is critical. The 3810000 cross-reference ensures it matches common OEM filter specs.

Built For Performance

• Magnetic core attracts and holds ferrous particles down to sub-micron size
• 3/8" barbed fittings fit common transmission cooler and power steering return lines
• Transparent housing allows quick visual inspection of fluid and captured debris
• Stainless steel mesh screen provides primary filtration with low flow restriction
• Reusable design reduces replacement frequency compared to disposable filters

Fits These Machines

• for trucks with 3/8" automatic transmission cooler lines
• for trucks with 3/8" power steering return lines
• for heavy-duty pickup and commercial chassis with OEM 3810000 filter applications

On-The-Job Use

• Install in the transmission cooler return line to protect the valve body from debris
• Fit on power steering return hoses to shield the pump from wear particles
• Use during fluid flushes to catch dislodged sludge and metal shavings
• Mount in auxiliary oil cooler circuits on tow trucks or service vehicles

Specs At A Glance

Good To Know

Q: How often should I clean this filter? A: Inspect it every 10,000 miles or during each transmission service. Clean the mesh and wipe the magnet when visible debris accumulates to maintain flow.

Q: Can this filter be used on both transmission and power steering lines? A: Yes, it works for either system as long as the hose is 3/8" and the operating pressure stays within standard return line limits, typically under 100 psi.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.