Camshaft Lifters Kit For 2014-2020 Chevrolet GMC Silverado Sierra 1500 4.3L V6
Camshaft Lifters Kit For 2014-2020 Chevrolet GMC Silverado Sierra 1500 4.3L V6
Couldn't load pickup availability
Camshaft Lifters Kit for Chevrolet GMC Silverado Sierra 1500 4.3L V6
This camshaft and lifters kit is built for 2014-2020 Chevrolet and GMC Silverado and Sierra 1500 trucks with the 4.3L V6 engine, supplying the valvetrain components needed for a cam and lifter replacement.
Overview
This camshaft and lifters kit is intended for 2014-2020 Chevrolet and GMC Silverado and Sierra 1500 trucks running the 4.3L V6. The camshaft drives valve timing while the matched lifters transfer that motion to the pushrods, making this kit a practical solution for worn or failed valvetrain parts. It suits DIY rebuilders and shops performing a top-end cam and lifter job in one pass.
Built For Performance
- Camshaft and lifter set matched for the 4.3L V6 valvetrain
- Hardened camshaft lobes for durability under load
- Lifters designed to work with the included camshaft profile
- Components sized for the 2014-2020 4.3L V6 application
- Kit format supplies cam and lifters together for one job
Fits These Machines
- for Chevrolet Silverado 1500 2014-2020 4.3L V6
- for GMC Sierra 1500 2014-2020 4.3L V6
On-The-Job Use
- Replacing a worn or flat camshaft in a 4.3L V6 truck
- Addressing noisy or failed lifters during top-end service
- Valvetrain refresh on high-mileage Silverado and Sierra 1500 trucks
- Cam and lifter replacement as part of an engine repair job
Specs At A Glance
| Engine | 4.3L V6 |
| Fitment | for Chevrolet Silverado 1500, for GMC Sierra 1500 |
| Year Range | 2014-2020 |
| Kit Contents | Camshaft and Lifters |
Good To Know
Q: Should the camshaft and lifters always be replaced together? A: Yes, new lifters should be paired with a new camshaft because lifters wear into a specific cam lobe pattern. Mixing used and new parts can cause premature failure.
Q: Is break-in oil or additive required after installation? A: Many builders use a dedicated break-in oil or additive and follow a controlled run-in procedure to protect the new cam lobes and lifters.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
