For 2001-2014 Honda Rubicon 500 (TRX500FA) Rear Left Right Shock Absorber Pair
For 2001-2014 Honda Rubicon 500 (TRX500FA) Rear Left Right Shock Absorber Pair
Couldn't load pickup availability
Rear Shock Absorber Pair for Honda Rubicon 500 TRX500FA
This pair of rear shock absorbers fits the left and right rear positions on the Honda Rubicon 500 (TRX500FA) from 2001 through 2014, replacing worn or leaking dampers with a matched set for balanced suspension performance.
Overview
This rear shock absorber pair is a direct-fit suspension set for the Honda Rubicon 500 (TRX500FA), covering the left and right rear positions in one order. Replacing both shocks together keeps damping matched side to side, which matters for stability on off-camber ground and under rear rack loads. It suits owners refreshing a high-hour trail machine as well as anyone chasing down a leak or a bottoming-out rear end.
Built For Performance
- Sold as a matched pair for left and right rear positions
- Direct fit for the Honda Rubicon 500 (TRX500FA) 2001-2014 rear suspension
- Preload-adjustable spring collar to compensate for rider and cargo weight
- Twin-tube damper construction for consistent oil control
- Gas-charged design helps resist fade on long rough sections
- Powder-coated spring for corrosion resistance in wet and muddy use
Fits These Machines
- for Honda Rubicon 500 TRX500FA (2001-2014)
- for Honda Rubicon 500 TRX500FA rear left position
- for Honda Rubicon 500 TRX500FA rear right position
On-The-Job Use
- Trail riding where matched rear damping improves cornering stability
- Farm and utility tasks with rear cargo or trailer tongue weight
- Hunting and recreation on uneven, rocky ground
- Full rear suspension refresh when one shock fails and both are due
Specs At A Glance
| Position | Rear left and rear right |
| Quantity | Pair |
| Type | Shock absorber with spring |
| Adjustment | Spring preload |
Good To Know
Q: Why replace both rear shocks at once? A: Two shocks of the same age and hours wear at similar rates, so replacing just one leaves you with mismatched damping that can pull the machine off-camber. A pair keeps the rear suspension balanced.
Q: Will these fit my 2001-2014 Rubicon 500 without modification? A: They are built as direct-fit rear replacements for the Honda Rubicon 500 (TRX500FA) across that year range, using the factory mounting points. Confirm your model code and eye-to-eye length before ordering.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
