For CG 150cc 200cc 250cc 9 Spline Teeth Air Cooled ATV Go Kart Engine Starter

9 Spline Starter Motor for CG 150cc 200cc 250cc Air Cooled ATV Go Kart

This 9 spline starter motor is designed for CG 150cc, 200cc, and 250cc air cooled engines used in ATVs and go karts, turning the engine over on each start. The starter motor uses a 9 tooth spline drive to engage the flywheel and serves riders and builders running CG-style engines.

Overview

This 9 spline starter motor replaces a failed or weak starter on CG 150cc, 200cc, and 250cc air cooled engines found in ATVs and go karts. The 9 tooth spline output engages the flywheel ring gear to crank the engine on push-button start. It is aimed at riders and kart builders working with CG-style air cooled powerplants.

Built For Performance

• 9 spline tooth count matches CG-style flywheel ring gears
• 12 volt DC motor built for air cooled ATV and go kart electrical systems
• Sealed body keeps out dust and track debris
• Steel spline drive for positive engagement and long service life
• Fits 150cc, 200cc, and 250cc CG engine cases

Fits These Machines

• for CG 150cc air cooled ATV
• for CG 200cc air cooled ATV
• for CG 250cc air cooled ATV
• for CG 150cc air cooled go kart
• for CG 200cc air cooled go kart
• for CG 250cc air cooled go kart

On-The-Job Use

• Replacing a starter that spins without engaging on a CG engine
• Restoring electric start on air cooled ATVs
• Servicing go kart engines between race days
• Rebuilds using CG 150cc to 250cc air cooled powerplants

Specs At A Glance

Good To Know

Q: How do I confirm the 9 spline starter is right for my engine? A: Count the spline teeth on your old starter pinion and check the mounting bolt pattern against this unit. The 9 tooth spline is specific to certain CG-style flywheels, so a mismatch will not engage.

Q: Can I install this starter without pulling the engine? A: On most CG ATV and go kart layouts the starter unbolts from the engine case with basic hand tools. Disconnect the battery first and inspect the starter clutch and ring gear while the starter is out.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.