For Infiniti G37 G35 Coupe Sedan HID Xenon Headlight Ballast Control HID Igniter

HID Xenon Headlight Ballast and Igniter for Infiniti G37 G35 Coupe Sedan

This HID Xenon Headlight Ballast Control and HID Igniter assembly powers the factory xenon headlamp on Infiniti G37 and G35 coupe and sedan models, replacing a failed ballast or igniter so the low beam lights reliably again.

Overview

This HID Xenon Headlight Ballast Control and HID Igniter is a direct-fit replacement for the xenon lighting system on Infiniti G37 and G35 coupe and sedan models. It steps up voltage to strike and sustain the HID arc, restoring steady, consistent headlight output when the original ballast or igniter fails. It suits owners and shops replacing a flickering, dim, or dead xenon low beam without buying a complete headlight assembly.

Built For Performance

• Ballast and igniter combined to drive the HID xenon arc on factory-equipped headlamps
• Plug-in connectors matched to the Infiniti G37 and G35 xenon headlight harness
• Housing built to mount in the factory ballast location under the headlight
• Delivers the high initial voltage needed to strike the xenon bulb, then regulates running current
• Restores consistent low beam output in place of a failed ballast or igniter

Fits These Machines

• for Infiniti G37 Coupe
• for Infiniti G37 Sedan
• for Infiniti G35 Coupe
• for Infiniti G35 Sedan

On-The-Job Use

• Replacing a failed or flickering xenon ballast on the factory HID headlight
• Restoring a dim or non-lighting low beam without swapping the whole headlight
• Shop repairs on Infiniti G37 and G35 front lighting systems
• Roadside or garage fixes for a dead xenon headlamp

Specs At A Glance

Good To Know

Q: Will this work if only my bulb is bad? A: This part replaces the ballast and igniter, not the bulb, so if the bulb itself is faulty you would also need a new xenon bulb. A failed ballast typically shows as flickering, dimming, or no light at all.

Q: Do I need to reprogram anything after installing it? A: No programming is required, since the ballast and igniter simply power the existing HID bulb. Plug the connectors in and test the headlight before buttoning up the housing.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.