Front Right Air Suspension Strut For Mercedes W212 W218 E350 E550 CLS550 4-Matic

Front Right Air Suspension Strut for Mercedes W212 W218

This front right air suspension strut is a replacement unit for Mercedes-Benz W212 and W218 models including E350, E550, and CLS550 with 4-Matic, restoring factory ride height and damping.

Overview

This front right air suspension strut is designed for Mercedes-Benz W212 and W218 chassis cars, replacing a leaking or collapsed air strut. It combines an air spring with a hydraulic damper to maintain ride height and absorb road impacts. Ideal for owners of E350, E550, or CLS550 4-Matic models facing a sagging front corner or error messages.

Built For Performance

• Combined air spring and shock absorber in one bolt-in assembly
• Designed for 4-Matic all-wheel-drive front axle geometry
• Rubber air sleeve built to hold pressure and resist cracking
• Damping calibrated for W212 and W218 chassis ride quality
• Pre-assembled for direct replacement of the original strut
• Front right (passenger side) position fitment

Fits These Machines

• for Mercedes-Benz E350 W212 4-Matic
• for Mercedes-Benz E550 W212 4-Matic
• for Mercedes-Benz CLS550 W218 4-Matic

On-The-Job Use

• Replacing a front strut that has lost air and dropped ride height
• Fixing a front corner that sags overnight or sits low
• Clearing air suspension warning messages on the dash
• Restoring factory ride comfort on 4-Matic E-Class and CLS models

Specs At A Glance

Good To Know

Q: Can I replace just one front strut? A: Replacing a single strut is possible, but many shops recommend doing both fronts together to keep damping and ride height balanced. If the other side is original with high mileage, it may fail soon after.

Q: Will this strut need calibration after installation? A: Yes, on most W212 and W218 models the air suspension system needs a ride height calibration through a diagnostic scan tool after install. This ensures the vehicle sits and rides at the correct level.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.