Medium Duty Onboard Air System 150 PSI Compressor 12V+2.5 Gallon Train/Air Horn

Medium Duty Onboard Air System with 150 PSI Compressor and 2.5 Gallon Tank

This medium duty onboard air system pairs a 12V 150 PSI compressor with a 2.5 gallon tank to supply compressed air on board for train horns and air accessories.

Overview

This onboard air system combines a 12V 150 PSI compressor with a 2.5 gallon air tank for vehicles that need a steady supply of compressed air. The onboard air system is intended for train horn and air horn setups, plus other air-driven accessories. It suits truck, SUV, and Jeep owners adding an air source without a shop compressor.

Built For Performance

• 12V compressor rated to 150 PSI for air horn and accessory duty
• 2.5 gallon tank stores air for horn blasts between compressor cycles
• Medium duty build suited to regular onboard air use
• Compact tank size fits a range of vehicle mounting locations
• System layout supports train horn and air horn installations

On-The-Job Use

• Powering train horns and air horns on trucks and SUVs
• Supplying air for onboard accessories on Jeeps and off-road rigs
• Adding an air source where a shop compressor is not available
• Supporting air-assisted accessories in daily driven vehicles

Specs At A Glance

Good To Know

Q: What can this onboard air system power? A: It supplies compressed air for train horns, air horns, and similar air accessories that run off a 12V compressor and tank. Confirm the air demand of the accessory matches what a 150 PSI, 2.5 gallon setup can deliver.

Q: How is the tank installed? A: The 2.5 gallon tank mounts to a solid point on the vehicle with the included hardware or a suitable bracket, and the compressor is wired to a 12V source. Route and secure all air lines away from heat and moving parts.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.