Oil Filter 7319444 for Bobcat Skid S185 S205 S220 S250 S300 S330 S450 S510 S530
Oil Filter 7319444 for Bobcat Skid S185 S205 S220 S250 S300 S330 S450 S510 S530
Couldn't load pickup availability
Oil Filter 7319444 for Bobcat
This oil filter 7319444 for Bobcat skid steer loaders is a direct replacement part designed to filter engine oil and prevent contaminants from causing premature wear. It serves as a cross-reference for OEM part number 7319444 and fits compatible Bobcat models including S185, S205, S220, S250, S300, S330, S450, S510, and S530.
Overview
This oil filter 7319444 is a spin-on cartridge that protects the engine by capturing impurities and ensuring clean oil circulates through critical components. It is built for Bobcat skid steer loaders and is a dependable choice for scheduled maintenance. This oil filter 7319444 meets rigorous filtration standards to support engine reliability.
Built For Performance
- Synthetic filter media provides high dirt-holding capacity
- Reinforced steel housing resists deformation under high pressure
- By-pass valve protects engine during cold starts or filter blockage
- Gasket designed for a tight seal to prevent oil leaks
- Consistent flow rate maintains stable oil pressure
Fits These Machines
- for Bobcat S185
- for Bobcat S205
- for Bobcat S220
- for Bobcat S250
- for Bobcat S300
- for Bobcat S330
- for Bobcat S450
- for Bobcat S510
- for Bobcat S530
On-The-Job Use
- Construction sites with heavy dirt and debris exposure
- Farm and ranch operations requiring frequent equipment use
- Rental fleets needing dependable filter replacement parts
Specs At A Glance
| Part Number(s) | 7319444 |
| Type | Spin-on oil filter |
| Fits | Bobcat skid steer loaders |
Good To Know
Q: What is the service interval for this oil filter? A: Replace this filter at every oil change, usually every 250 hours of operation or once per year, whichever comes first. Consistent replacement maintains engine efficiency.
Q: Are there any specific installation tips? A: Pre-fill the new filter with clean oil before screwing it on, and tighten it by hand snugly, then an additional three-quarter turn. Always check for leaks after the first start.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
