P553207 Fuel Filter Water Separator Fit for Donaldson Spin-On

Fuel Filter Water Separator for Donaldson Spin-On

This P553207 fuel filter water separator is a spin-on replacement element designed to remove contaminants and separate water from diesel fuel, protecting your engine's injection system. It is built for Donaldson spin-on filter heads. This fuel filter water separator for Donaldson ensures reliable filtration for diesel engines in demanding conditions.

Overview

This P553207 fuel filter water separator for Donaldson is a direct-replacement spin-on filter that combines particulate filtration with water separation in a single serviceable unit. It is intended for diesel engines that use a Donaldson spin-on filter head, providing essential protection for fuel injectors and pumps. This fuel filter water separator for Donaldson removes harmful debris and water to maintain clean fuel delivery.

Built For Performance

• Spin-on design allows for quick and easy replacement without special tools
• High-efficiency filtration media captures abrasive particles down to micron level
• Integrated water separator coalesces and traps moisture to prevent injector damage
• Constructed with a robust metal housing for high burst strength in demanding environments
• Gasket included for a secure, leak-free seal during installation

Fits These Machines

• for Donaldson spin-on filter heads that accept the P553207 specification

On-The-Job Use

• Used in off-highway equipment such as agricultural tractors and construction machinery with diesel engines
• Applied in commercial trucking and fleet operations where fuel quality may vary
• Commonly installed in stationary industrial diesel generators and compressor units

Specs At A Glance

Good To Know

Q: How often should the fuel filter water separator be replaced? A: For optimal performance, replace it according to your engine manufacturer's recommended service interval, typically every 10,000 to 20,000 miles or annually. Regular replacement prevents a drop in fuel pressure and protects injectors from damage due to contaminated fuel.

Q: Can I install this P553207 fuel filter water separator by myself? A: Yes, because it is a spin-on type, you can generally replace it with basic hand tools by cleaning the mounting surface, applying a light coat of clean oil to the gasket, and tightening it by hand until snug. Always verify the old gasket is removed with the old filter to ensure a proper seal.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.