Pair 2 Inch 4/110 Rear Wheel Spacers For Honda Sportrax 400 TRX400EX 2x4 1999-08
Pair 2 Inch 4/110 Rear Wheel Spacers For Honda Sportrax 400 TRX400EX 2x4 1999-08
Couldn't load pickup availability
2 Inch 4/110 Rear Wheel Spacers for Honda Sportrax 400 TRX400EX
These 2 inch 4/110 rear wheel spacers for Honda Sportrax 400 TRX400EX 2x4 models add width to the rear track for improved stability. Sold as a pair, these rear wheel spacers for Honda bolt between the hub and wheel on a 4/110 bolt pattern. They are made for riders who want a wider, more planted stance on TRX400EX 2x4 machines from 1999 through 2008.
Overview
This pair of 2 inch rear wheel spacers for Honda Sportrax 400 TRX400EX 2x4 quads widens the rear axle for a more stable feel in turns. The 4/110 bolt pattern matches the factory hub and wheel stud layout. Riders use these rear wheel spacers for Honda to sharpen cornering and add clearance between tire and machine.
Built For Performance
- Adds 2 inches of rear track width per side
- 4/110 bolt pattern matches the factory hub and wheel studs
- Sold as a matched pair for left and right rear
- Machined spacer body with countersunk hardware provisions
- Direct bolt-on fitment at the hub without cutting
Fits These Machines
- for Honda Sportrax 400 TRX400EX 2x4 1999
- for Honda Sportrax 400 TRX400EX 2x4 2000
- for Honda Sportrax 400 TRX400EX 2x4 2001
- for Honda Sportrax 400 TRX400EX 2x4 2002
- for Honda Sportrax 400 TRX400EX 2x4 2003
- for Honda Sportrax 400 TRX400EX 2x4 2004
- for Honda Sportrax 400 TRX400EX 2x4 2005
- for Honda Sportrax 400 TRX400EX 2x4 2006
- for Honda Sportrax 400 TRX400EX 2x4 2007
- for Honda Sportrax 400 TRX400EX 2x4 2008
On-The-Job Use
- Trail riding where a wider rear stance improves stability
- Track and closed-course use for sharper cornering
- Sand and dune riding for a flatter, more planted feel
- Recreational riding where tire-to-machine clearance is needed
Specs At A Glance
| Part Type | Rear Wheel Spacers |
| Quantity | Pair |
| Width Added | 2 Inch |
| Bolt Pattern | 4/110 |
Good To Know
Q: Do I need longer studs to install these? A: Spacers are supplied with the mounting hardware shown for the 4/110 pattern. Confirm the hardware matches your machine before install.
Q: Will these widen my quad's rear track evenly? A: Yes, a matched pair adds 2 inches per side when installed on both rear hubs.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
