Skip to product information
1 of 10

Power Steering Pump fit for Acura MDX 2007-13 Honda Odyssey 2005-10 Pilot 05-08

Power Steering Pump fit for Acura MDX 2007-13 Honda Odyssey 2005-10 Pilot 05-08

Regular price $166.29
Regular price Sale price $166.29
Sale Sold out
Quantity

Power Steering Pump for Acura and Honda

This power steering pump restores hydraulic assist to the steering system on a range of Honda and Acura vehicles, working as a direct replacement for the factory unit.

Overview

This power steering pump is a hydraulic unit that pressurizes steering fluid so the wheel turns with minimal effort on Honda and Acura models. It mounts in the factory location and connects to the existing pulley, reservoir, and pressure lines, making it a practical fix for whining, stiff, or leaking steering. It suits DIY owners and shops servicing high-mileage Honda and Acura SUVs and minivans.

Built For Performance

  • Housing and internal components machined to match factory mounting points
  • Seals and bearings selected to handle continuous hydraulic pressure
  • Pulley hub sized to accept the original drive belt and pulley
  • Inlet and outlet ports positioned for direct connection to stock lines
  • Pressure output calibrated for the original steering rack and gear
  • Tested for leaks and flow before packing

Fits These Machines

  • for Acura MDX 2007-2013
  • for Honda Odyssey 2005-2010
  • for Honda Pilot 2005-2008

On-The-Job Use

  • Replacing a failed pump on a daily-driven MDX or Pilot
  • Restoring assist on an Odyssey used for family hauling
  • Fixing a whining or groaning pump before it seizes
  • Stopping fluid leaks that leave spots on the driveway
  • Servicing high-mileage Honda and Acura SUVs and minivans

Specs At A Glance

Part Type Power Steering Pump
Fitment Acura MDX 2007-13, Honda Odyssey 2005-10, Honda Pilot 05-08
Drive Belt-driven, factory pulley mounting

Good To Know

Q: Do I need to bleed the system after installing this pump? A: Yes, air trapped in the hydraulic circuit causes noise and poor assist, so bleed the system by turning the wheel lock to lock with the engine running while topping up fluid.

Q: Will this pump work with my original pulley and lines? A: It is built to accept the stock pulley and connect to the factory pressure and return lines on the listed models, so no adapter parts are normally needed.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.

Get it between -

View full details