Transfer Case Assembly for Nissan Pathfinder 2013-2019 3.5L V6 VQ35DE 331003KA0B

Transfer Case Assembly for Nissan

This transfer case assembly for Nissan Pathfinder 2013-2019 models with the 3.5L V6 VQ35DE engine, reference 331003KA0B, routes drive torque to the front and rear axles for all-wheel drive operation.

Overview

This transfer case assembly for Nissan sends engine torque to both axles so the vehicle can run in all-wheel drive. It bolts to the transmission output and houses the internal gearing and chain that split power front to rear. It is built for owners and shops replacing a failed or noisy transfer case on 2013-2019 Pathfinder models.

Built For Performance

• Direct replacement for the 331003KA0B transfer case assembly
• Housing and internal gearing configured for the 3.5L V6 VQ35DE drivetrain
• Splits torque between front and rear axles for all-wheel drive
• Sealed case keeps lubricant contained at the output shafts
• Mounting points match the original transmission and driveshaft connections

Fits These Machines

• for Nissan Pathfinder 2013
• for Nissan Pathfinder 2014
• for Nissan Pathfinder 2015
• for Nissan Pathfinder 2016
• for Nissan Pathfinder 2017
• for Nissan Pathfinder 2018
• for Nissan Pathfinder 2019

On-The-Job Use

• Replacing a transfer case with worn bearings or chain noise
• Restoring all-wheel drive after internal case failure
• Driveline repairs on high-mileage Pathfinder SUVs
• Shop replacements where a complete bolt-in unit saves rebuild time

Specs At A Glance

Good To Know

Q: Does this transfer case come filled with fluid? A: Transfer cases are normally drained for shipping, so fill with the specified fluid before driving. Check the fill and drain plugs after installation for leaks.

Q: Can I install this myself? A: Transfer case replacement involves supporting the transmission and removing driveshafts, so it suits experienced DIYers or shops with a lift. Confirm the part number 331003KA0B matches your vehicle before ordering.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.