17.6247F ProX Clutch Basket for KTM EXC-R 530 EXC-R530 2008-2011

ProX Clutch Basket for KTM EXC-R 530

This ProX Clutch Basket, part number 17.6247F, is a replacement clutch basket assembly for compatible KTM EXC-R 530 machines, built to hold the clutch pack and transfer drive torque smoothly.

Overview

This ProX Clutch Basket serves as the outer housing for the clutch pack on the KTM EXC-R 530, holding the friction and steel plates while driving the primary gear. It is aimed at riders and mechanics replacing a notched, cracked, or worn basket. The 17.6247F basket restores clean clutch release and consistent engagement.

Built For Performance

• Direct replacement for the factory clutch basket position on the EXC-R 530
• ProX construction aimed at resisting notching from repeated clutch use
• Part number 17.6247F identifies the exact fitment in the ProX catalog
• Designed to carry the full clutch pack for the 530 engine platform
• Maintains proper plate alignment for smooth engagement and release
• Replacement part reduces drag caused by worn basket fingers

Fits These Machines

• for KTM EXC-R 530 2008
• for KTM EXC-R 530 2009
• for KTM EXC-R 530 2010
• for KTM EXC-R 530 2011

On-The-Job Use

• Clutch rebuilds after the basket fingers show notching
• Replacing a cracked or damaged basket on the EXC-R 530
• Servicing high-hour enduro and dual-sport machines
• Restoring smooth clutch feel on trail and race bikes

Specs At A Glance

Good To Know

Q: Do I need new clutch plates with this basket? A: New plates are not required, but inspecting friction and steel plates while the clutch is apart is a good practice for a 530 rebuild.

Q: Can this basket be installed with basic tools? A: Yes, installation follows the standard clutch removal procedure, though a torque wrench and the correct holding tool are needed to fasten the basket nut properly.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.