272000183 Drive Shaft Bellow for Sea-Doo Utopia SE 215 1503 2009

Drive Shaft Bellow for Sea-Doo Utopia / SE 215 1503

This drive shaft bellow is a replacement rubber boot for the jet pump driveline on Sea-Doo Utopia / SE 215 1503 watercraft, sealing the through-hull opening where the drive shaft passes to keep water out and grease in, and it cross-references OEM part number 272000183.

Overview

This drive shaft bellow is a direct replacement sealing boot for the driveline on Sea-Doo Utopia / SE 215 1503 jet boats. The bellow flexes with the drive shaft while keeping water out of the hull and holding grease at the bearing area. It is intended for owners performing routine driveline service or replacing a cracked or hardened original boot.

Built For Performance

• Flexible rubber construction that moves with the drive shaft through steering and trim range
• Seals the hull pass-through to help keep bilge water out of the driveline area
• Retains grease at the shaft bearing for consistent lubrication
• Cross-references OEM part number 272000183 for straightforward replacement
• Direct-fit shape for the 1503 engine driveline found in Utopia and SE models
• Withstands repeated immersion and marine exposure

Fits These Machines

• for Sea-Doo Utopia 215
• for Sea-Doo Utopia SE 215
• for Sea-Doo 1503 engine applications using part 272000183

On-The-Job Use

• Replacing a cracked, torn, or hardened drive shaft bellow during driveline service
• Routine jet pump and driveshaft maintenance on Utopia and SE models
• Driveline refresh after a season of heavy use or water intrusion
• Keeping the hull pass-through sealed during regular riding

Specs At A Glance

Good To Know

Q: Is this an original Sea-Doo part? A: No, this is an aftermarket replacement bellow that cross-references OEM part number 272000183. It is designed to fit the same driveline position as the original.

Q: When should a drive shaft bellow be replaced? A: Replace it when the rubber shows cracks, tears, or hardening, or whenever the driveline is apart for service. A worn bellow can let water into the hull and allow grease to escape.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.