3150TD Ring Set 80.00mm for Wiseco

Ring Set, 80.00mm for Wiseco

This 80.00mm ring set for Wiseco is a replacement piston ring assembly that seals the combustion chamber and manages oil control on the cylinder wall.

Overview

This ring set, 80.00mm for Wiseco provides the rings required to seal a piston inside its cylinder bore during a top end rebuild. Sized at 80.00mm, the set pairs with the piston it is built for and includes the rings needed for a complete refresh. It is aimed at riders, racers, and engine builders replacing worn or damaged rings.

Built For Performance

• 80.00mm bore sizing to match the specified piston
• Compression and oil control rings included
• Steel construction that holds tension through heat cycles
• Controlled end gap and thickness for reliable sealing
• Service replacement for rings worn past spec

Specs At A Glance

Good To Know

Q: How do I confirm this ring set matches my piston? A: Check the 80.00mm bore size and the 3150TD part number against your piston before ordering. Ring sets are made for a specific piston, so the number stamped on it is the best reference.

Q: Do rings need measuring before assembly? A: Yes, verifying end gap and fit in the ring lands is normal practice on any top end job. It confirms sizing before the cylinder is reassembled.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.