3162VS Ring Set 3.162in for Wiseco 3.162in Piston Ring Set
3162VS Ring Set 3.162in for Wiseco 3.162in Piston Ring Set
Couldn't load pickup availability
Exhaust Pipe Gasket for Arctic Cat Crossfire 800
This exhaust pipe gasket for Arctic Cat Crossfire 800 sleds seals the joint between the pipe and the manifold, stopping exhaust leaks and the power loss and noise that come with them.
Overview
This doughnut-style exhaust pipe gasket for Arctic Cat Crossfire 800 is a sealing component that fits between the exhaust pipe and the engine manifold to stop hot gases escaping at the joint. It keeps back pressure steady so the engine breathes as intended, and it is the right part for anyone servicing a trail or mountain sled in this model line. Whether you are chasing a persistent exhaust leak, a rattle at the pipe joint, or the loss of top end that comes with a blown gasket, this part for Arctic Cat is a sensible item to keep in the shop drawer.
Built For Performance
- Doughnut design compresses to seal the taper between the exhaust pipe and manifold
- Heat-tolerant construction suited to the sustained temperatures of a two-stroke exhaust system
- Resists the vibration that a snowmobile tunnel and engine mounts pass through the exhaust
- Simple press-fit installation at the pipe joint without special tools
- Sold as a single gasket, so you can order the exact number of replacements your rebuild needs
Fits These Machines
- for Arctic Cat Crossfire 800, 2007
- for Arctic Cat Crossfire 800, 2008
- for Arctic Cat Crossfire 800, 2009
- for Arctic Cat Crossfire 800, 2010
- for Arctic Cat Crossfire 800, 2011
On-The-Job Use
- Exhaust pipe resealing on a Crossfire 800 after top end work
- Fixing a leak at the manifold joint that shows as soot tracks or a sharp tick under the hood
- Routine refresh during pre-season sled maintenance
- Trailside or shop repair when the old gasket has burned away or gone brittle
Specs At A Glance
| Part Type | Exhaust pipe gasket, doughnut style |
| Application | Exhaust pipe to manifold joint |
| Fitment Years | 2007 to 2011 |
| Quantity | Single gasket |
Good To Know
Q: How do I know the old gasket is failing? A: Common signs are a sharp exhaust tick, soot marks around the pipe joint, a rattle, or a drop in power. Replacing the doughnut and checking the pipe for cracks at the same time saves repeat labor.
Q: Should I replace the gasket every time the exhaust pipe comes off? A: Yes, a doughnut gasket compresses once and rarely seals again after it has been disturbed or heat cycled. A fresh gasket is cheap insurance against a leak.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
