Skip to product information
1 of 1

451M08650 Wiseco .060 Piston Kit for Yamaha YZ465 IT465 1980-1982 86.50 mm

451M08650 Wiseco .060 Piston Kit for Yamaha YZ465 IT465 1980-1982 86.50 mm

Regular price $505.99
Regular price Sale price $505.99
Sale Sold out
Quantity

Wiseco .060 Piston Kit for Yamaha YZ465 & IT465

This Wiseco .060 oversize piston kit for Yamaha YZ465 and IT465 models is an 86.50 mm piston assembly that restores lost compression on high-hour top ends, and the kit cross-references part numbers 451M08650.

Overview

This Wiseco .060 piston kit for Yamaha YZ465 and IT465 models is a top-end rebuild component sized at 86.50 mm. It is intended for riders and mechanics bringing a worn 1980 through 1982 two-stroke cylinder back into service. Each piston kit for Yamaha YZ465 and IT465 applications carries Wiseco part number 451M08650 for straightforward identification.

Built For Performance

  • .060 oversize bore size of 86.50 mm for heavily worn or previously bored cylinders
  • Wiseco forged piston construction for durability under race and trail loads
  • Precision-machined ring grooves for a dependable ring seal
  • Part number 451M08650 stamped for verification against the original
  • Kit includes piston, rings, wrist pin, and circlips for a complete top-end refresh
  • Sized specifically for Yamaha YZ465 and IT465 1980-1982 engines

Fits These Machines

  • for Yamaha YZ465, 1980-1982
  • for Yamaha IT465, 1980-1982

On-The-Job Use

  • Top-end rebuilds on vintage two-stroke dirt bikes
  • Cylinder boring to a large oversize after significant wear
  • Restoring compression on older motocross and enduro machines
  • Engine refresh during a full rebuild project
  • Shop work where the cylinder needs a fresh bore and piston

Specs At A Glance

Part Number(s) 451M08650
Piston Size 86.50 mm
Oversize .060 in
Application Yamaha YZ465 & IT465, 1980-1982
Type Piston kit

Good To Know

Q: Is this piston kit a genuine Yamaha part? A: No, this is a Wiseco-manufactured piston kit made for Yamaha YZ465 and IT465 fitment, not an OEM Yamaha part. The 451M08650 reference confirms the intended application.

Q: Will this .060 piston drop into a stock cylinder? A: No, the cylinder must first be bored and honed to the matching 86.50 mm clearance, since this is a large oversize piston. Piston-to-wall clearance and ring end gap should be checked before final assembly.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.

Get it between -

View full details