520-114 O-Ring Drive Chain for Suzuki RM250 1997-2008 RM 250

520-114 O-Ring Drive Chain for Suzuki RM250

The 520-114 O-Ring Drive Chain is a replacement drive chain built to transfer power from the countershaft sprocket to the rear wheel on the Suzuki RM250 from 1997 through 2008. The O-ring design seals lubricant in and keeps grit out at the pins and rollers, which helps extend chain life between adjustments compared to a standard non-sealed chain. This chain is aimed at riders who want dependable driveline performance for trail sessions, practice laps, and weekend motocross days.

Overview

The 520-114 O-Ring Drive Chain is a 520-pitch, 114-link sealed chain offered as a replacement for the stock chain on the Suzuki RM250 from 1997 through 2008. Its O-ring construction keeps factory grease in place at the pins while blocking dirt, water, and grit from entering the joints. Riders replacing a worn, stretched, or kinked chain will find this 520-114 O-Ring Drive Chain an efficient option for restoring smooth power delivery to the rear wheel.

Built For Performance

• 520-pitch sizing matched to the RM250 driveline
• 114 links for proper fitment on the listed models
• O-ring seals hold lubricant at the pins and rollers
• Sealed joints resist dirt and water intrusion
• Steel construction for strength under load
• Designed as a direct replacement for the stock chain

Fits These Machines

• for Suzuki RM250 1997
• for Suzuki RM250 1998
• for Suzuki RM250 1999
• for Suzuki RM250 2000
• for Suzuki RM250 2001
• for Suzuki RM250 2002
• for Suzuki RM250 2003
• for Suzuki RM250 2004
• for Suzuki RM250 2005
• for Suzuki RM250 2006
• for Suzuki RM250 2007
• for Suzuki RM250 2008

On-The-Job Use

• Motocross practice and race days
• Trail riding and off-road loops
• Routine driveline refresh after chain stretch
• Replacing a snapped or kinked chain mid-season

Specs At A Glance

Good To Know

Q: Is this chain the same as the original Suzuki part? A: No, it is an aftermarket replacement chain sized at 520 pitch and 114 links for the RM250 from 1997 through 2008. It is a functional substitute, not an OEM Suzuki chain.

Q: Can I install this chain with my current sprockets? A: Yes, but pairing a new chain with worn sprockets can accelerate chain stretch. Inspect sprocket teeth for wear and replace them together when they show hooking or flat spots.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.