520-116 O-Ring Drive Chain for Suzuki RM125 1984 1987 RM 125
520-116 O-Ring Drive Chain for Suzuki RM125 1984 1987 RM 125
Couldn't load pickup availability
O-Ring Drive Chain for Suzuki RM125
This 520-116 O-ring drive chain is a direct replacement chain built to transfer power from the countershaft sprocket to the rear wheel on 1984 and 1987 Suzuki RM125 dirt bikes.
Overview
This 520-116 O-ring drive chain delivers reliable power transfer for the 1984 and 1987 Suzuki RM125. Each O-ring seals factory grease inside the rollers to reduce wear and stretch, so the chain holds adjustment longer between services. Riders replacing a worn or stretched chain on a classic RM125 will find this 520-116 drive chain an economical option for getting back on the track.
Built For Performance
- 520 pitch, 116 link count matched to the RM125 driveline
- O-ring seals retain lubricant and block dirt and grit from the pins and bushings
- Heat-treated steel construction for tensile strength under acceleration loads
- Sealed design reduces friction loss and extends service life over standard chains
- Roller and pin tolerances held for smooth engagement with the sprockets
Fits These Machines
- for Suzuki RM125, 1984
- for Suzuki RM125, 1987
On-The-Job Use
- Motocross and off-road riding on 1984 and 1987 RM125 machines
- Replacing a stretched, kinked, or seized chain during routine maintenance
- Trail riding and practice sessions where chain durability matters
- Restoration projects that need a correctly sized 520-116 chain
Specs At A Glance
| Part Number(s) | 520-116 |
| Chain Pitch | 520 |
| Link Count | 116 |
| Chain Type | O-ring sealed |
Good To Know
Q: Does an O-ring chain need regular lubrication? A: Yes. The O-rings seal grease inside the rollers, but the outer plates and sprocket contact points still need periodic lubricant to control wear. Clean and lube the chain after wet or dusty rides.
Q: Will a 116 link chain fit both the 1984 and 1987 RM125? A: A 116 link 520 chain matches the stock length called out for these model years, but sprocket size changes can alter the needed length. Verify your setup before ordering.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
