530-104 O-Ring Drive Chain for Suzuki GS400 GS400X GS 400 1977-1978
530-104 O-Ring Drive Chain for Suzuki GS400 GS400X GS 400 1977-1978
Couldn't load pickup availability
530-104 O-Ring Drive Chain for Suzuki GS400 & GS400X
This 530-104 O-Ring Drive Chain for Suzuki fits the GS400 and GS400X from 1977-1978, delivering sealed, low-maintenance power transfer to the rear wheel. The O-ring design keeps grease in and debris out, making it a practical replacement for classic Suzuki twins still in regular use.
Overview
This 530-104 O-Ring Drive Chain is a replacement chain intended for the Suzuki GS400 and GS400X from 1977 and 1978. Sealed O-rings hold lubricant at the pins and bushings while pushing contaminants away, which keeps the driveline smooth and extends service intervals on older machines. It suits owners keeping a classic GS 400 on the road and riders who want a chain that tolerates real-world conditions.
Built For Performance
- O-ring seals retain grease at each pin and bushing joint
- 530 pitch matched to the original GS400 driveline
- 104 links sized for stock gearing on the GS400 and GS400X
- Hardened rollers and pins for wear resistance under load
- Pre-stretched during manufacturing to limit initial elongation
Fits These Machines
- for Suzuki GS400, 1977-1978
- for Suzuki GS400X, 1977-1978
- for Suzuki GS 400 models using 530 pitch chain
On-The-Job Use
- Routine driveline service on a GS400 or GS400X
- Chain and sprocket replacement during restoration work
- Bringing a stored classic Suzuki back into regular riding
- Weekend riding where long service life matters more than racing weight
Specs At A Glance
| Part Number(s) | 530-104 |
| Chain Type | O-ring sealed |
| Pitch | 530 |
| Link Count | 104 |
| Fitment | Suzuki GS400 and GS400X, 1977-1978 |
Good To Know
Q: Will this chain fit if my bike has non-stock sprockets? A: Gearing changes can alter the required link count, so count the links on your current chain before ordering. A 104-link 530 chain matches the stock setup for these models.
Q: How is an O-ring chain maintained differently? A: Clean it with a dedicated chain cleaner and lube the outer plates, since the internal grease is sealed in. Avoid stiff wire brushing and harsh solvents that can damage the O-rings.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
