644M04800 Wiseco Std Piston Kit for Kawasaki KX80 1988-2000 48.00 mm
644M04800 Wiseco Std Piston Kit for Kawasaki KX80 1988-2000 48.00 mm
Couldn't load pickup availability
Piston Kit for Kawasaki KX80
This Wiseco Std piston kit is an aftermarket top-end component for the Kawasaki KX80, sized at 48.00 mm and cross-referenced under part number 644M04800 for a stock-bore rebuild.
Overview
This Wiseco piston kit gives Kawasaki KX80 owners a stock-bore replacement option sized at 48.00 mm. The kit is built for riders and mechanics rebuilding a worn or seized top end on 1988 through 2000 KX80 machines without going oversize. Each Kawasaki KX80 piston kit is produced to Wiseco tolerances so the top end goes back together with consistent fit.
Built For Performance
- Wiseco Std piston sized at 48.00 mm for a stock-bore cylinder
- Forged piston construction for strength under high-rpm two-stroke loads
- Cross-reference part number 644M04800 for easy verification
- Kit format supplies the piston and matched components for one top-end rebuild
- Sized specifically for the Kawasaki KX80 1988-2000 platform
Fits These Machines
- for Kawasaki KX80 1988
- for Kawasaki KX80 1989
- for Kawasaki KX80 1990
- for Kawasaki KX80 1991
- for Kawasaki KX80 1992
- for Kawasaki KX80 1993
- for Kawasaki KX80 1994
- for Kawasaki KX80 1995
- for Kawasaki KX80 1996
- for Kawasaki KX80 1997
- for Kawasaki KX80 1998
- for Kawasaki KX80 1999
- for Kawasaki KX80 2000
On-The-Job Use
- Top-end rebuilds after a seize or loss of compression
- Routine piston and ring replacement on a high-hour two-stroke
- Stock-bore refresh when the cylinder is still within spec
- Restoration of a 1988-2000 Kawasaki KX80
Specs At A Glance
| Part Number(s) | 644M04800 |
| Piston Size | 48.00 mm |
| Oversize | Standard |
| Brand | Wiseco |
| Machine | Kawasaki KX80 1988-2000 |
Good To Know
Q: Does this piston kit fit my KX80? A: It is sized for the Kawasaki KX80 1988-2000, but bore condition and serial number should be confirmed before ordering. A standard piston requires the cylinder bore to be within factory spec.
Q: Is this an original Kawasaki part? A: No, this is a Wiseco piston kit made for the Kawasaki KX80 and is not an original brand item. Verify the cross-reference 644M04800 against your machine before purchase.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
