6D3-11181-00-00 Head Gasket for Yamaha VX Deluxe 1100 2005-2015
6D3-11181-00-00 Head Gasket for Yamaha VX Deluxe 1100 2005-2015
Couldn't load pickup availability
Head Gasket for Yamaha VX Deluxe 1100
This head gasket seals the cylinder head to the engine block on the Yamaha VX Deluxe 1100, crossing to OEM reference 6D3-11181-00-00 to help restore proper compression and cooling performance on your personal watercraft.
Overview
This head gasket is a direct-fit sealing component made for the Yamaha VX Deluxe 1100 personal watercraft. It sits between the cylinder head and engine block to contain combustion pressure, oil, and coolant so the engine runs at the temperatures and compression it was designed for. It is intended for riders and mechanics replacing a failed or leaking gasket during top-end service.
Built For Performance
- Cross-references OEM part number 6D3-11181-00-00 for easier lookup and order verification
- Constructed to seal the cylinder head to the engine block under combustion pressure
- Designed to hold coolant and oil passages tight and reduce leak paths
- Suited to rebuild and top-end refresh work on the Yamaha VX Deluxe 1100
- Keeps combustion chamber sealing consistent for stable compression
Fits These Machines
- for Yamaha VX Deluxe 1100 (2005-2015)
On-The-Job Use
- Top-end rebuilds and cylinder head removal on the VX Deluxe 1100
- Repairing coolant or compression leaks traced to a failed head gasket
- Routine engine refresh during impeller or cooling system service
- Shop and DIY rebuild work where OEM fitment is required
Specs At A Glance
| Part Number(s) | 6D3-11181-00-00 |
| Machine | for Yamaha VX Deluxe 1100 |
| Model Years | 2005-2015 |
| Component Type | Head Gasket |
Good To Know
Q: Does this gasket cross to the factory part number? A: Yes, it references OEM number 6D3-11181-00-00, which matches the head gasket listed for the Yamaha VX Deluxe 1100 from 2005 through 2015.
Q: Should I replace head bolts at the same time? A: Torque-to-yield or stretched head bolts are often replaced whenever the cylinder head is removed, so check your service manual and inspect bolt condition before reassembly.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
