Skip to product information
1 of 1

707000995 Air Temperature Pressure Sensor for Can-Am Renegade 800 2007-2015

707000995 Air Temperature Pressure Sensor for Can-Am Renegade 800 2007-2015

Regular price $71.39
Regular price Sale price $71.39
Sale Sold out
Quantity

Air Temperature/Pressure Sensor for Can-Am Renegade 800

This air temperature/pressure sensor, OEM cross-reference 707000995, measures intake air temperature and manifold pressure so the ECU can meter fuel correctly on 2007-2015 Can-Am Renegade 800 machines.

Overview

This air temperature/pressure sensor is a direct-fit replacement for the factory unit on 2007-2015 Can-Am Renegade 800 models. It reads both incoming air temperature and manifold pressure, feeding that data to the ECU so fuel delivery stays accurate across the rev range. Built for riders and shops replacing a failed or drifting sensor on a Can-Am Renegade 800.

Built For Performance

  • Combines air temperature and pressure sensing in one compact body
  • OEM cross-reference 707000995 for straightforward parts matching
  • Sealed connector resists moisture and trail debris
  • Plug-and-play install onto the factory harness
  • Housing built to withstand engine bay heat cycles
  • Restores accurate load data to the ECU after sensor failure

Fits These Machines

  • for Can-Am Renegade 800 (2007-2015)

On-The-Job Use

  • Trail riding where altitude and temperature shifts affect fueling
  • Mud and water crossings where sensor sealing matters
  • Cold starts when accurate intake readings aid warm-up fueling
  • Routine diagnostics and sensor replacement in the shop

Specs At A Glance

Part Number(s) 707000995
Sensor Type Air temperature and pressure
Position Intake tract
Connection Factory-style plug

Good To Know

Q: How do I know if my air temperature/pressure sensor has failed? A: Common signs include poor idle, rich or lean running, hard starting, and a check engine light on a Can-Am Renegade 800. A scan tool reading that does not change with conditions points to a bad sensor.

Q: Does this sensor need calibration after installation? A: No calibration is normally required; the ECU reads it directly once the connector is seated. Clear any stored codes after fitting and confirm live data reads correctly.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.

Get it between -

View full details