8" Carbides for Polaris Pro-X 600 2001 Pair
8" Carbides for Polaris Pro-X 600 2001 Pair
Couldn't load pickup availability
8" Carbides for Polaris Pro-X 600
This pair of 8 inch carbides is a wear-replacement runner set that bolts to the ski saddles of a 2001 Polaris Pro-X 600 snowmobile to restore steering bite and protect the ski bottoms.
Overview
These 8" carbides are a direct-fit wear runner set made for the 2001 Polaris Pro-X 600 snowmobile. Each carbide in this pair bites into hardpack and ice so the skis track straight and turn with less push through the corners. They suit riders replacing worn runners or dialing in a fresh set for trail season.
Built For Performance
- Carbide wear bars that sharpen steering response on hardpack and ice
- 8 inch length for a balance of straight-line tracking and cornering bite
- Sold as a matched pair so both skis run the same runner
- Steel bar body with a hardened carbide insert at the leading edge
- Bolt-on mounting that reuses the stock ski saddle hardware
Fits These Machines
- for Polaris Pro-X 600, 2001
On-The-Job Use
- Trail riding where icy corners and hardpack demand extra bite
- Lake and river running on glazed surfaces
- Routine runner replacement once the old carbide is worn flat
Specs At A Glance
| Part Type | Carbide ski runner |
| Length | 8 in |
| Quantity | Pair |
| Machine | for Polaris Pro-X 600, 2001 |
Good To Know
Q: How long do carbides typically last? A: Carbide runners wear with mileage and how much bare pavement or gravel the sled crosses, so inspect the insert each season and replace it once it is rounded or worn thin.
Q: Do both runners need replacing at once? A: Yes, worn carbides on only one ski can make the sled pull or dart, so replace the pair together for even steering.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
