8200KB Ring Set 82.00mm for Wiseco

Ring Set for Wiseco

This 82.00mm piston ring set is made to seal the combustion chamber and control oil on high-performance four-stroke engines, and it cross-references Wiseco part number 8200KB.

Overview

This ring set is a replacement piston ring set sized at 82.00mm for rebuilds and top-end refreshes. It works with the matching piston to restore compression and oil control on a worn or freshly bored cylinder. It suits riders and engine builders who want a fresh ring set with correct end gap and thickness for the bore size.

Built For Performance

• 82.00mm bore size for a precise match to the cylinder
• Ring set configuration covers compression and oil control rings
• Manufactured to Wiseco ring specifications and tolerances
• Cross-references Wiseco part number 8200KB
• Suited to rebuilding a top end with a matching 82.00mm piston

Specs At A Glance

Good To Know

Q: Do I need to check ring end gap before installing? A: Yes, ring end gap should always be measured in the cylinder before assembly to confirm it falls within the specification. Filing to size may be required depending on the bore and piston.

Q: Can I reuse my old piston with this ring set? A: This ring set is intended to match a piston designed for an 82.00mm bore, so pairing it with the correct piston matters. Inspect the piston skirt and groove clearance before reuse.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.