92049-3720 Jet Pump Oil Seal for Kawasaki ZXi 1100 1996-2003
92049-3720 Jet Pump Oil Seal for Kawasaki ZXi 1100 1996-2003
Couldn't load pickup availability
Jet Pump Oil Seal for Kawasaki
This jet pump oil seal replaces OEM part 92049-3720 to keep water out and lubrication in on Kawasaki ZXi 1100 personal watercraft built from 1996 through 2003.
Overview
This jet pump oil seal for Kawasaki is a direct replacement for part 92049-3720, sealing the pump shaft so water stays out of the bearing cavity and grease stays where it belongs. It suits riders and mechanics servicing the jet pump on Kawasaki ZXi 1100 models from 1996 to 2003. Install this jet pump oil seal whenever the pump is apart for impeller or bearing work.
Built For Performance
- Cross-references OEM part number 92049-3720 for straightforward ordering
- Seals the pump shaft against water intrusion into the bearing housing
- Holds grease in place to protect pump bearings from wear
- Built to withstand constant contact with water and pump vibration
- Fits Kawasaki ZXi 1100 models covering the 1996 through 2003 model years
Fits These Machines
- for Kawasaki ZXi 1100 (1996-2003)
On-The-Job Use
- Jet pump rebuilds on Kawasaki ZXi 1100 personal watercraft
- Bearing and impeller service where the pump housing is already open
- Routine maintenance of the pump shaft sealing area
- Repairs after water was found in the pump bearing cavity
Specs At A Glance
| Part Number(s) | 92049-3720 |
| Type | Jet pump oil seal |
| Compatibility | for Kawasaki ZXi 1100, 1996-2003 |
Good To Know
Q: How do I know if my jet pump oil seal needs replacing? A: Signs include water or milky grease in the pump bearing cavity, grease leaking past the seal, or noise from worn pump bearings. Because the seal sits inside the pump assembly, replacement is normally done while the pump is apart for service.
Q: Can this seal be installed without removing the jet pump? A: No, the pump typically has to come off the hull so the housing can be opened and the old seal pressed out. Plan the job together with any bearing or impeller work so the pump only comes apart once.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
