Bearing Housing Repair Kit for Yamaha FX Cruiser SVHO LTD 1800 2017-2026

Bearing Housing Repair Kit for Yamaha

This bearing housing repair kit for Yamaha provides the bearings and seals needed to rebuild the jet pump bearing housing on FX Cruiser SVHO LTD 1800 watercraft.

Overview

This bearing housing repair kit for Yamaha is made to service the jet pump drive line on FX Cruiser SVHO LTD 1800 models from 2017 through 2026. The kit covers the bearings and sealing parts that keep the pump shaft spinning freely and block water from entering the housing. It suits owners and technicians doing scheduled pump maintenance or a complete bearing replacement on a Yamaha FX Cruiser SVHO LTD.

Built For Performance

• Supplies the bearings needed to rebuild the jet pump bearing housing
• Includes sealing components that guard against water intrusion
• Matched to the 1800 engine family used in Yamaha FX Cruiser SVHO LTD models
• Direct replacement for worn or noisy bearing housing internals
• Suited to routine pump service and full rebuild jobs

Fits These Machines

• for Yamaha FX Cruiser SVHO LTD 1800, 2017-2026

On-The-Job Use

• Rebuilding a jet pump bearing housing during seasonal service
• Replacing failed bearings after water intrusion into the pump
• Servicing supercharged watercraft run at high hours
• Preventive maintenance before the riding season begins

Specs At A Glance

Good To Know

Q: Can I install this kit without pulling the pump? A: The pump assembly normally has to come out so the housing can be pressed apart, and a service manual for the FX Cruiser SVHO LTD is recommended. Q: What tells me the housing bearings need replacing? A: Growling, vibration, or water found in the pump cavity during inspection usually points to bearing or seal failure in the housing.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.