Bearing Housing Repair Kit for Yamaha FZR 1800 2009-2016 Jet Ski Fits
Bearing Housing Repair Kit for Yamaha FZR 1800 2009-2016 Jet Ski Fits
Couldn't load pickup availability
Bearing Housing Repair Kit for Yamaha FZR 1800
This bearing housing repair kit is built to restore the jet pump bearing housing on Yamaha FZR 1800 watercraft, replacing worn bearings and seals so the pump spins smoothly again. It is a direct-fit service kit for riders and mechanics performing driveline maintenance on 2009 through 2016 models.
Overview
This bearing housing repair kit for Yamaha FZR 1800 contains the bearings and seals needed to rebuild a worn jet pump bearing housing. The kit keeps the pump shaft supported and sealed against water intrusion, protecting the driveline during hard acceleration and long rides. It suits DIY owners and shop technicians servicing 2009 to 2016 FZR 1800 machines.
Built For Performance
- Includes bearings and seals required to rebuild the bearing housing assembly
- Seals hold grease in and keep water out of the housing
- Bearings are sized to the FZR 1800 pump shaft for correct fit
- Components resist corrosion in fresh and salt water use
- Service kit format covers the common wear items in one purchase
Fits These Machines
- for Yamaha FZR 1800 (2009-2016)
On-The-Job Use
- Rebuilding a jet pump bearing housing during routine service
- Replacing noisy or rough-spinning pump bearings
- Fixing water intrusion that has contaminated the housing grease
- Pre-season driveline maintenance on FZR 1800 watercraft
Specs At A Glance
| Part Type | Bearing Housing Repair Kit |
| Compatible Brand | for Yamaha |
| Model | FZR 1800 |
| Year Range | 2009-2016 |
Good To Know
Q: What does this bearing housing repair kit include? A: It supplies the bearings and seals needed to rebuild the pump bearing housing on a Yamaha FZR 1800. Confirm your model year and pump configuration before ordering.
Q: How do I know the bearing housing needs a rebuild? A: Rough bearing noise, play in the pump shaft, or water in the housing grease are common signs. Replacing the bearings and seals together is the standard fix.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
