Skip to product information
1 of 1

Carburetor Mounting Flange for Polaris Indy Longtrak 440 Fits 1988-1989 Sled

Carburetor Mounting Flange for Polaris Indy Longtrak 440 Fits 1988-1989 Sled

Regular price $32.99
Regular price Sale price $32.99
Sale Sold out
Quantity

Carburetor Mounting Flange for Polaris Indy Longtrak 440

This carburetor mounting flange is the intake manifold boot that seals the carb to the engine on 1988-1989 Polaris Indy Longtrak 440 snowmobiles, keeping the air-fuel mixture leak-free between the carburetor and cylinder.

Overview

This carburetor mounting flange is a direct-fit intake boot for the 1988-1989 Polaris Indy Longtrak 440. It seats the carburetor against the engine intake, sealing the joint so the engine draws unmetered air only through the carb. It suits riders doing routine maintenance on a classic Indy Longtrak 440 carburetor setup.

Built For Performance

  • Rubber construction flexes with engine vibration to keep the carburetor seated
  • Bolt-on flange pattern matches the stock intake mounting points
  • Resists fuel, oil, and cold-weather cracking common on older sleds
  • Restores a proper seal to stop lean-running air leaks at the carb joint
  • Replaces a cracked or hardened original flange without intake modification

Fits These Machines

  • for Polaris Indy Longtrak 440, 1988
  • for Polaris Indy Longtrak 440, 1989

On-The-Job Use

  • Carburetor service and rebuilds on the Indy Longtrak 440
  • Replacing a hardened or cracked intake flange before the season starts
  • Tracking down air leaks that cause lean running or hard starting
  • Routine top-end maintenance on a vintage Polaris trail sled

Specs At A Glance

Part Type Carburetor mounting flange
Machine Fitment for Polaris Indy Longtrak 440
Years 1988-1989
Mounting Bolt-on flange style

Good To Know

Q: How do I know if my flange needs replacing? A: Cracks, a hardened surface, or a fuel-stained area around the carb joint typically point to a failed flange. A lean-running or surging engine that smooths out when you spray around the intake is another sign.

Q: Do I need new gaskets with this part? A: It is good practice to fit fresh gaskets on both sides of the flange during installation. Reusing old, compressed gaskets can leave small leaks even with a new flange.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.

Get it between -

View full details