Carburetor Repair Kit for Arctic Cat Z 440 & Z 440 ES 2001 Z440

Carburetor Repair Kit for Arctic Cat Z 440 & Z 440 ES

This carburetor repair kit supplies the gaskets, seals, and metering components needed to rebuild the carb on a 2001 Arctic Cat Z 440 or Z 440 ES snowmobile.

Overview

This carburetor repair kit gives you the wear parts needed to bring a tired carb back to spec on a 2001 Arctic Cat Z 440 or Z 440 ES. The kit covers the soft goods that harden and leak over seasons of use, so the carburetor can meter fuel cleanly again. It suits riders and shops rebuilding a Z440 top end or chasing a rough idle.

Built For Performance

• Gaskets and seals sized for the stock Z 440 carburetor body
• Needle and seat components for consistent fuel level control
• Soft goods formulated to resist ethanol-blended fuel
• Direct replacement for worn OEM carburetor internals
• Enough parts to service one carburetor
• Fits 2001 Z 440 and Z 440 ES models

Fits These Machines

• for Arctic Cat Z 440, 2001
• for Arctic Cat Z 440 ES, 2001

On-The-Job Use

• Seasonal carburetor rebuilds before winter riding
• Fixing rough idle, bog, or hard cold starts
• Cleaning and resealing a carb pulled for jetting changes
• Baseline refresh on a used Z440 snowmobile

Specs At A Glance

Good To Know

Q: Does this kit include jets? A: Kits of this type typically cover gaskets, seals, and the needle and seat rather than a full jet set. Check your carburetor's current jetting before ordering if you also need jets.

Q: Can I install this without removing the carburetor? A: A proper rebuild calls for pulling the carburetor so the body can be cleaned and the passages checked. Doing it on the machine usually leaves debris behind.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.