Clutch Puller for Arctic Cat Bearcat 340 1995-2000 Snowmobile
Clutch Puller for Arctic Cat Bearcat 340 1995-2000 Snowmobile
Couldn't load pickup availability
Clutch Puller for Arctic Cat Bearcat 340
This clutch puller is a removal tool made to free the drive clutch from the crankshaft on Arctic Cat Bearcat 340 machines, letting you service the clutch without damaging shaft threads.
Overview
This clutch puller is built to remove the drive clutch from the crankshaft on Arctic Cat Bearcat 340 snowmobiles. It threads into the clutch and uses a center bolt to press against the crank end, drawing the clutch free. A practical tool for anyone doing their own clutch service on these machines.
Built For Performance
- Threaded body sized to engage the clutch center hole
- Center forcing bolt for steady, controlled removal
- Hardened steel construction for repeated use
- Compact size for easy storage in a tool bag
Fits These Machines
- for Arctic Cat Bearcat 340, 1995-2000
On-The-Job Use
- Removing the drive clutch during belt and clutch service
- Clutch rebuilds and spring replacement
- Crankshaft seal and bearing inspection
- Trailside clutch work when a spare is needed
Specs At A Glance
| Type | Clutch puller tool |
| Application | Arctic Cat Bearcat 340, 1995-2000 |
Good To Know
Q: Do I need to remove the clutch bolt first? A: Yes, the retaining bolt must come out before this puller threads into the clutch. Once the bolt is out, thread the puller in and tighten the center bolt to press the clutch off.
Q: Can I use an impact wrench with this puller? A: Hand tools are recommended so you can feel the clutch release and avoid over-torquing. Applying steady pressure with a breaker bar gives the most control.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
