Countershaft Seal Kit for KTM EXC 500 2012-2016
Countershaft Seal Kit for KTM EXC 500 2012-2016
Couldn't load pickup availability
Countershaft Seal Kit for KTM EXC 500
This countershaft seal kit is a replacement sealing solution for the KTM EXC 500, designed to stop oil weeping around the countershaft where it exits the engine case. It restores the seal at the sprocket area so lubricant stays inside the transmission and dirt stays out.
Overview
This countershaft seal kit fits the KTM EXC 500 across the 2012 to 2016 model years. The countershaft seal kit prevents transmission oil from escaping past the output shaft and keeps grit out of the gearbox. It is a sensible replacement part for riders servicing a leaking seal or refreshing a drivetrain during rebuild work.
Built For Performance
- Direct replacement for the countershaft output seal position
- Seals the shaft opening where the front sprocket mounts
- Fuel and oil resistant seal material for long service life
- Works with the standard countershaft sprocket assembly
- Kit form simplifies ordering the seal and related sealing components together
Fits These Machines
- for KTM EXC 500 2012
- for KTM EXC 500 2013
- for KTM EXC 500 2014
- for KTM EXC 500 2015
- for KTM EXC 500 2016
On-The-Job Use
- Trail riding where mud and water cross the countershaft area
- Enduro racing with repeated sprocket changes
- Routine gearbox oil seal replacement
- Bottom end and transmission rebuilds
- Post-season maintenance on high-hour engines
Specs At A Glance
| Part Type | Countershaft Seal Kit |
| Machine | for KTM EXC 500 |
| Model Years | 2012 to 2016 |
| Location | Countershaft output, behind front sprocket |
Good To Know
Q: Do I need to remove the engine to install this seal kit? A: No, countershaft seals are normally serviced with the engine in the frame after removing the front sprocket and its retaining hardware. Access can vary slightly with aftermarket guards and sprocket covers.
Q: How do I know the countershaft seal is failing? A: Common signs include oil collecting around the front sprocket, oil misting on the swingarm and chain, and dropping gearbox oil level without an obvious external leak elsewhere. A worn seal lip or a loose countershaft bearing often causes this on high-hour machines.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
