Countershaft Seal Kit for KTM SX 520 2000-2002
Countershaft Seal Kit for KTM SX 520 2000-2002
Couldn't load pickup availability
Countershaft Seal Kit for KTM SX 520
This countershaft seal kit is a replacement sealing set for the KTM SX 520, made to stop oil leaking from the countershaft area so the transmission on your big-bore motocross machine stays properly lubricated.
Overview
This countershaft seal kit is designed to renew the seal at the countershaft on the KTM SX 520 engine, holding transmission oil where it belongs and keeping grit out of the case. It is aimed at owners of 2000 to 2002 machines who handle their own engine service and want a straightforward countershaft reseal. The kit covers the seals needed to complete the job without sourcing parts individually.
Built For Performance
- Direct replacement sealing set for the KTM SX 520 countershaft position
- Oil-resistant seal material built to handle transmission fluid and engine heat
- Dimensions and profiles matched to the original countershaft housing bore
- Kit format provides the seals needed for a complete countershaft reseal
- Seals against both oil migration and dirt ingress at the shaft exit point
Fits These Machines
- for KTM SX 520 (2000)
- for KTM SX 520 (2001)
- for KTM SX 520 (2002)
On-The-Job Use
- Countershaft reseal during bottom-end rebuilds and engine service
- Stopping oil weep near the sprocket before it reaches the sump guard
- Replacing worn seals while the engine is already apart
- Keeping the countershaft area clean through motocross and trail riding
Specs At A Glance
| Part Type | Countershaft seal kit |
| Machine | KTM SX 520 |
| Year Range | 2000-2002 |
| Position | Countershaft |
Good To Know
Q: Will this kit fit my 2001 SX 520? A: It is listed for the KTM SX 520 across the 2000 to 2002 model years. Verify your machine year and serial number before ordering, since running changes can affect countershaft dimensions.
Q: What else should I have on hand for this job? A: Fresh transmission oil, a clean work area, and the correct seal driver for your housing bore will help. It is also a good moment to check the countershaft bearing and sprocket for wear.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
