Countershaft Seal Kit for KTM XC-W 450 2007-2016
Countershaft Seal Kit for KTM XC-W 450 2007-2016
Couldn't load pickup availability
Countershaft Seal Kit for KTM
This countershaft seal kit for KTM provides the seals and components needed to reseal the countershaft area of the engine and stop oil weeping around the sprocket shaft.
Overview
This countershaft seal kit for KTM is a direct replacement sealing set for the countershaft output area of the engine case. It renews the seal that keeps oil inside the transmission while the countershaft spins, and the kit suits riders and mechanics rebuilding that area during a service or repair.
Built For Performance
- Seals the countershaft output where it exits the engine case
- Stops oil seepage and grime buildup around the front sprocket
- Direct-fit design for the listed KTM XC-W 450 model years
- Includes the seal components needed for a complete reseal job
- Suited to routine maintenance and bottom-end rebuilds
Fits These Machines
- for KTM XC-W 450 2007
- for KTM XC-W 450 2008
- for KTM XC-W 450 2009
- for KTM XC-W 450 2010
- for KTM XC-W 450 2011
- for KTM XC-W 450 2012
- for KTM XC-W 450 2013
- for KTM XC-W 450 2014
- for KTM XC-W 450 2015
- for KTM XC-W 450 2016
On-The-Job Use
- Stopping oil leaks at the countershaft during regular maintenance
- Resealing the output shaft area during a top-end or bottom-end rebuild
- Trail and enduro riding where oil retention around the sprocket matters
- Workshop service to refresh tired seals before a riding season
Specs At A Glance
| Part Type | Countershaft Seal Kit |
| Compatible Brand | for KTM |
| Compatible Models | XC-W 450 |
| Model Years | 2007-2016 |
Good To Know
Q: Do I need to split the engine cases to fit this seal kit? A: In most cases the countershaft seal is accessible from outside the engine case, though some procedures require removing the sprocket and its retaining hardware first.
Q: Should I replace the seal even if the leak is small? A: A small weep tends to worsen over time, so replacing the seal during routine service is a practical way to protect the gearbox oil level.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
