Skip to product information
1 of 1

Engine Crank Seals for Yamaha Wolverine 450 4x4 2006-2010

Engine Crank Seals for Yamaha Wolverine 450 4x4 2006-2010

Regular price $99.49
Regular price Sale price $99.49
Sale Sold out
Quantity

Engine Crank Seals for Yamaha Wolverine 450 4x4

These engine crank seals are replacement crankshaft sealing components that keep oil sealed inside the crankcase and contaminants out on the Yamaha Wolverine 450 4x4. They are intended as a direct replacement for worn or leaking original seals. Designed to fit 2006 through 2010 models, these crank seals help restore proper lubrication control after a rebuild or leak repair.

Overview

These engine crank seals for the Yamaha Wolverine 450 4x4 are made to seal the crankshaft where it passes through the crankcase, preventing oil seepage and blocking dirt from entering the engine. They suit owners rebuilding the bottom end or repairing an oil leak on a 2006-2010 Wolverine 450 4x4. As a replacement set, these crank seals provide a dependable seal for the machine's engine internals.

Built For Performance

  • Made from oil-resistant rubber that resists hardening and cracking.
  • Spring-loaded lip creates steady sealing pressure against the crankshaft.
  • Formed to original seal dimensions for a direct fit.
  • Handles the heat and vibration common to ATV crankcase service.
  • Supplied as a set for servicing both crankshaft sides in one repair.

Fits These Machines

  • for Yamaha Wolverine 450 4x4 (2006)
  • for Yamaha Wolverine 450 4x4 (2007)
  • for Yamaha Wolverine 450 4x4 (2008)
  • for Yamaha Wolverine 450 4x4 (2009)
  • for Yamaha Wolverine 450 4x4 (2010)

On-The-Job Use

  • Bottom-end rebuilds and crankshaft service.
  • Fixing oil leaks around the crankshaft on used Wolverine 450 machines.
  • Maintenance when cases are split for inspection.
  • Restoring sealing performance on trail and utility-use ATVs.

Specs At A Glance

Part Number(s) Not stated in listing title
Fitment Years 2006-2010
Machine for Yamaha Wolverine 450 4x4
Component Crankshaft oil seals

Good To Know

Q: What are the signs of a leaking crank seal on a Wolverine 450? A: Watch for oil around the crankshaft area, unexplained oil loss, or poor running after a rebuild. If the engine is already apart, replacing the seals is a low-cost step that prevents repeat labor.

Q: Do these seals require splitting the engine cases to install? A: Crankshaft seals on most ATV engines are seated in the crankcase halves, so installation typically requires splitting the cases and removing the crankshaft. Check the service manual for your Wolverine 450 model year to confirm.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.

Get it between -

View full details