Exhaust Gasket Spring Kit for Ski-Doo Summit 800 E-Tec P-Tek 2016

Exhaust Gasket/Spring Kit for Ski-Doo Summit 800 E-Tec/P-Tek

This exhaust gasket and spring kit is made for the 2016 Ski-Doo Summit 800 E-Tec/P-Tek snowmobile, sealing the exhaust joints and holding the pipe assembly together under vibration.

Overview

This exhaust gasket and spring kit is made for the 2016 Ski-Doo Summit 800 E-Tec/P-Tek snowmobile, sealing the exhaust joints and holding the pipe assembly together under vibration. The exhaust gasket and spring kit provides replacement seals and tension springs for the sled's exhaust system when the originals wear out or leak. It suits riders doing routine maintenance or repairing a mountain sled that sees hard use.

Built For Performance

• Gasket material chosen for the heat and pressure of two-stroke exhaust systems
• Springs sized to keep exhaust joints tight against vibration and chassis flex
• Direct replacement for worn, hardened, or leaking factory gaskets
• Helps reduce exhaust leaks and excess noise at the joints
• Kit form so gasket and springs arrive together for the same repair

Fits These Machines

• for Ski-Doo Summit 800 E-Tec, 2016
• for Ski-Doo Summit 800 P-Tek, 2016

On-The-Job Use

• Exhaust joint resealing during seasonal sled maintenance
• Replacing blown or hardened gaskets after heavy riding
• Pipe removal and reinstallation during top-end or exhaust service
• Shop or trailside repairs where springs no longer hold tension

Specs At A Glance

Good To Know

Q: Should the gasket be replaced whenever the exhaust is taken apart? A: Exhaust gaskets act as crush seals and are best replaced once the joint is opened to prevent leaks. Check the springs at the same time and replace any that have stretched.

Q: Does this kit cover both the E-Tec and P-Tek versions? A: This kit is listed for the 2016 Summit 800 in E-Tec and P-Tek form, and fitment can vary by model year and build. Verify your sled's specific configuration before ordering.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.