Exhaust Temperature Sensor for Polaris Pro RMK 800 2011-2015
Exhaust Temperature Sensor for Polaris Pro RMK 800 2011-2015
Couldn't load pickup availability
Exhaust Temp/Temperature Sensor for Polaris Pro RMK 800
This exhaust temperature sensor for Polaris Pro RMK 800 snowmobiles monitors exhaust gas temperature so the engine management system can adjust fueling and protect the powerplant.
Overview
This exhaust temp sensor for Polaris Pro RMK 800 replaces a failed or inaccurate temperature probe in the exhaust stream. The sensor for Polaris Pro RMK 800 feeds critical data to the ECU so fuel delivery stays within safe limits. It suits riders and shops servicing 2011 through 2015 Pro RMK 800 sleds.
Built For Performance
- Threaded probe designed to seat in the exhaust sensor port
- Electrical connector matches the factory harness plug
- Thermistor element reads exhaust gas temperature across the operating range
- Housing materials suited to high-heat exhaust environments
- Direct replacement for the original sensor location
Fits These Machines
- for Polaris Pro RMK 800 (2011-2015)
On-The-Job Use
- Diagnosing and clearing exhaust temperature sensor fault codes
- Mountain riding where altitude and load stress the fueling system
- Seasonal maintenance before deep snow riding begins
- Repairing sleds that run rich or enter limp mode from bad sensor data
Specs At A Glance
| Part Type | Exhaust temperature sensor |
| Vehicle Fitment | for Polaris Pro RMK 800, 2011-2015 |
Good To Know
Q: Will a bad exhaust temp sensor trigger a check engine light? A: Yes, the ECU commonly logs a fault and may limit power when the sensor signal falls out of range.
Q: Should I apply anti-seize when installing this sensor? A: A light coat of high-temperature anti-seize on the threads helps future removal, but keep it off the probe tip.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
