Fork Seal and Wiper Set for Suzuki RM60 RM 60 1979-1983
Fork Seal and Wiper Set for Suzuki RM60 RM 60 1979-1983
Couldn't load pickup availability
Fork Seal and Wiper Set for Suzuki RM 60
This fork seal and wiper set keeps the front suspension on Suzuki RM 60 models from 1979 through 1983 sealing properly and free of oil loss. The kit supplies both the oil seal and the dust wiper so a fork service can be done in one pass. Owners of these classic small-bore motocross bikes get the wear parts that commonly fail first.
Overview
This fork seal and wiper set is made for the Suzuki RM 60 and renews the sealing surfaces on both fork legs. The oil seal holds damping fluid inside while the wiper scrapes dust and grit off the tube before it can damage the lip. It is intended for anyone maintaining or restoring an RM60 from the 1979 to 1983 years.
Built For Performance
- Pairs oil seals with dust wipers for a complete fork reseal
- Sealing lip sized for the RM60 fork tube to resist oil bypass under load
- Wiper edge clears dirt and mud from the stanchion on each stroke
- Withstands fork oil exposure and repeated compression cycles
- Direct replacement for worn or leaking original seals
Fits These Machines
- for Suzuki RM 60 (1979-1983)
- for Suzuki RM60
On-The-Job Use
- Front fork rebuilds on vintage motocross bikes
- Curing oil seepage onto the fork tube and brake zone
- Track and trail riding where dust and grit wear the seals
- Restoring an RM60 for racing or collection
Specs At A Glance
| Part Type | Fork Seal and Wiper Set |
| Position | Front Forks |
| Compatibility | for Suzuki RM 60, 1979-1983 |
Good To Know
Q: What are the signs that fork seals need replacing? A: Oil streaks on the fork tube, a soft or bouncy front end, and dirt built up around the seal are the usual clues. Replacing the seal and wiper together at the same time is the standard approach.
Q: Can these seals be installed without a shop press? A: Yes, a seal driver or a carefully used drift will seat them, and patience prevents damage to the lip. Lubricating the seal before fitting helps it slide into place.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
