Front Left Lower Control Arm with Ball Joint for Cadillac XT5 3.6L V6 GAS 17-19

Front Left Lower Control Arm with Ball Joint for Cadillac

This front left lower control arm with integrated ball joint replaces the worn suspension arm on Cadillac XT5 3.6L V6 GAS models from 2017 to 2019, restoring proper wheel alignment and steering response.

Overview

This front left lower control arm with ball joint is a direct-fit suspension replacement for the Cadillac XT5 with the 3.6L V6 gas engine. It connects the subframe to the steering knuckle, keeping the wheel positioned correctly through suspension travel. Ideal for drivers chasing down clunks, uneven tire wear, or loose steering.

Built For Performance

• Integrated ball joint pressed into the arm for a complete unit
• Stamped steel arm built to original geometry
• Rubber bushings damp vibration and road noise
• Direct bolt-on replacement for the front left position
• Designed for the 3.6L V6 gas XT5 platform

Fits These Machines

• for Cadillac XT5 3.6L V6 GAS 2017
• for Cadillac XT5 3.6L V6 GAS 2018
• for Cadillac XT5 3.6L V6 GAS 2019

On-The-Job Use

• Replacing a bent arm after pothole or curb impact
• Fixing clunking noises over bumps
• Correcting uneven front tire wear
• Restoring steering feel after bushing wear

Specs At A Glance

Good To Know

Q: Does this control arm include the ball joint? A: Yes, the ball joint is integrated into the arm. Check your existing hardware and replace any worn mounting bolts during installation.

Q: Is an alignment needed after installing this arm? A: Yes, a professional wheel alignment is recommended after replacing a control arm. This ensures the front suspension geometry is set correctly.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.