Front Right Door Lock Latch Actuator 2-Pins for Nissan Pathfinder 3.5L 2018-2020
Front Right Door Lock Latch Actuator 2-Pins for Nissan Pathfinder 3.5L 2018-2020
Couldn't load pickup availability
Front Right Door Lock Latch Actuator for Nissan
This front right door lock latch actuator with a 2-pin connector restores reliable power locking on the passenger front door of 2018-2020 Pathfinder models, replacing a failed factory unit so the door locks and unlocks as designed.
Overview
This door lock latch actuator is a direct-fit replacement for the front right door on Nissan Pathfinder 3.5L models from 2018 through 2020. It converts the electrical lock signal into mechanical latch movement so the passenger front door locks and unlocks with the switch, key fob, or central locking system. A solid choice for owners chasing down a door that will not lock or unlock on command.
Built For Performance
- 2-pin electrical connector matches the factory door harness plug
- Integrated latch actuator assembly for direct replacement of the failed unit
- Sealed motor housing resists dust and moisture inside the door cavity
- Constructed for consistent lock and unlock cycling under daily use
- Precise mounting points align with the original factory holes
Fits These Machines
- for Nissan Pathfinder 3.5L 2018
- for Nissan Pathfinder 3.5L 2019
- for Nissan Pathfinder 3.5L 2020
On-The-Job Use
- Restoring power lock function to the front passenger door
- Repairing a door that fails to lock or unlock with the fob or switch
- Routine replacement of a worn or noisy door latch actuator
- Service work on central locking systems
Specs At A Glance
| Position | Front Right (Passenger Side) |
| Connector | 2-Pin |
| Type | Door Lock Latch Actuator |
| Vehicle Fit | for Nissan Pathfinder 3.5L 2018-2020 |
Good To Know
Q: Will this fit both front doors? A: No, this actuator is built for the front right, or passenger side, door only. Check your model year and door position before ordering.
Q: Do I need to reprogram anything after installing it? A: Typically no programming is required, since the actuator works with the existing central locking signal. Test the lock and unlock functions after installation to confirm proper operation.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
