Hydraulic Filter SH52265 HF35529 for Komatsu Wheel Loader WB93R-5 WB93S-5 WB97R5
Hydraulic Filter SH52265 HF35529 for Komatsu Wheel Loader WB93R-5 WB93S-5 WB97R5
FREE, Fast Shipping on all orders!
Hydraulic Filter SH52265 HF35529 for Komatsu
This hydraulic filter, cross-referenced as SH52265 and HF35529, provides high-efficiency filtration for Komatsu Wheel Loader models WB93R-5, WB93S-5, and WB97R5, protecting the hydraulic system from contaminants and extending component life.
Overview
Designed as a direct replacement hydraulic filter for Komatsu wheel loaders, this filter uses a high-capacity media to trap particles and maintain clean oil flow. The SH52265/HF35529 filter is essential for keeping hydraulic systems operating reliably under heavy loads.
Built For Performance
- High-quality cellulose/synthetic blend media for excellent dirt-holding capacity
- Integrated bypass valve prevents oil starvation during cold starts or clogging
- Steel end caps and center tube for burst strength up to 150 psi
- Gaskets designed to withstand high-temperature hydraulic oil
- Threaded base with O-ring seal ensures leak-free installation
Fits These Machines
- for Komatsu Wheel Loader WB93R-5
- for Komatsu Wheel Loader WB93S-5
- for Komatsu Wheel Loader WB97R5
On-The-Job Use
- Construction sites where wheel loaders handle earthmoving and material handling
- Mining and quarry operations requiring continuous hydraulic performance
- Road building and maintenance with frequent start-stop cycles
- Waste and recycling applications with dusty environments
Specs At A Glance
| Part Number(s) | SH52265, HF35529 |
| Filtration Rating | 10 micron nominal |
| Bypass Valve Setting | 25 psi |
| Outside Diameter | 3.66 in (93 mm) |
| Length | 7.09 in (180 mm) |
Good To Know
Q: How often should this hydraulic filter be changed? A: Follow Komatsu's recommended interval, typically every 500 hours or as indicated by your machine's service indicator, especially in severe-duty conditions.
Q: Can this filter be used with synthetic hydraulic fluids? A: Yes, the media and seals are compatible with most mineral-based and synthetic hydraulic oils, but always verify fluid compatibility with your equipment manual.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
