Ignition Sensor Pickup Coil for Polaris 800 LE 2001
Ignition Sensor Pickup Coil for Polaris 800 LE 2001
Couldn't load pickup availability
Ignition Sensor / Pickup Coil for Polaris
This ignition sensor and pickup coil assembly provides the trigger signal your engine's ignition system needs to fire the spark plugs at the correct moment, and it is a direct replacement for the original unit on the 2001 Polaris 800 LE.
Overview
This ignition sensor and pickup coil is built to restore reliable spark timing on the 2001 Polaris 800 LE. The pickup coil reads the flywheel trigger and sends that signal to the CDI box so the ignition fires at the right instant, keeping the engine running clean and strong. It suits riders and mechanics replacing a failed or intermittent sensor on this specific model.
Built For Performance
- Direct replacement for the original ignition sensor and pickup coil on the 2001 Polaris 800 LE
- Coil winding designed to deliver a consistent trigger signal to the CDI box
- Sealed construction helps resist moisture, vibration, and heat from the engine bay
- Pre-set mounting holes line up with the factory stator plate location
- Wire leads and connector configured to match the factory harness
- Built to hold stable resistance values across the rev range
Fits These Machines
- for Polaris 800 LE, 2001
On-The-Job Use
- Restoring spark on a machine that has lost ignition or runs intermittently
- Routine ignition system service when a pickup coil reads out of spec
- Trailside or shop troubleshooting of no-start and misfire conditions
- Rebuilding a stator assembly during engine work
Specs At A Glance
| Part Type | Ignition Sensor / Pickup Coil |
| Machine | for Polaris 800 LE |
| Model Year | 2001 |
| Function | Trigger signal to CDI / ignition |
Good To Know
Q: How do I know if my pickup coil has failed? A: A failed pickup coil commonly causes no spark, hard starting, or a misfire that worsens with heat, and a resistance check against the service spec confirms it.
Q: Does this include the stator and flywheel? A: No, this listing is for the ignition sensor and pickup coil only, so you will reuse your existing stator plate, flywheel, and related hardware.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
