Ignition Sensor Pickup Coil for Polaris Dragon Switchback 800 2009-2010
Ignition Sensor Pickup Coil for Polaris Dragon Switchback 800 2009-2010
Couldn't load pickup availability
Ignition Sensor / Pickup Coil for Polaris Dragon Switchback 800
This ignition sensor and pickup coil assembly supplies the trigger signal the ignition module needs to fire the plugs on 2009-2010 Polaris Dragon Switchback 800 snowmobiles.
Overview
This ignition sensor / pickup coil is a direct-fit replacement for the failed trigger unit on 2009-2010 Polaris Dragon Switchback 800 sleds. The ignition sensor restores the signal that tells the CDI when to spark, so the engine starts cleanly and runs on both cylinders again. It suits riders doing their own seasonal service or rebuilding a sled that has lost spark.
Built For Performance
- Direct replacement for the original pickup coil position on the Dragon Switchback 800
- Restores spark trigger signal to the CDI box for reliable starting
- Coil and sensor body sealed against snow, moisture, and engine heat
- OE-style connector and lead length for plug-in installation
- Fits 2009-2010 model years of the Dragon Switchback 800
Fits These Machines
- for Polaris Dragon Switchback 800 (2009)
- for Polaris Dragon Switchback 800 (2010)
On-The-Job Use
- Replacing a failed pickup coil that has caused a no-spark condition
- Seasonal ignition service on high-mileage Dragon Switchback 800 sleds
- Trailside or shop troubleshooting of intermittent spark issues
- Rebuilding a sled engine with new ignition components
Specs At A Glance
| Part Type | Ignition Sensor / Pickup Coil |
| Machine | for Polaris Dragon Switchback 800 |
| Model Years | 2009-2010 |
Good To Know
Q: How do I know the pickup coil is the problem? A: A failed pickup coil usually shows as no spark at the plugs or a tachometer that stops reading while cranking. Testing resistance at the connector against the service manual spec confirms it.
Q: Does this replace the stator too? A: No, this is the ignition sensor and pickup coil only, not the stator assembly. If your stator windings test out of spec, they will need to be replaced separately.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
