Skip to product information
1 of 1

Ignition Sensor Pickup Coil for Polaris Pro-X 600 Pro-X2 2001-2004

Ignition Sensor Pickup Coil for Polaris Pro-X 600 Pro-X2 2001-2004

Regular price $48.39
Regular price Sale price $48.39
Sale Sold out
Quantity

Ignition Sensor / Pickup Coil for Polaris Pro-X 600

This ignition sensor and pickup coil assembly provides the trigger signal your engine needs to fire on time across the 2001 to 2004 Polaris Pro-X 600 and Pro-X2. Its stator-mounted pickup reads the flywheel trigger and sends spark timing to the CDI, keeping the ignition sensor responsive on every pull.

Overview

This ignition sensor / pickup coil is a direct replacement part for the Polaris Pro-X 600 and Pro-X2 snowmobiles built from 2001 to 2004. It reads flywheel rotation and delivers the pulse that tells the CDI when to fire, so the engine starts cleanly and holds timing through the rev range. It suits riders repairing a no-spark condition or replacing a cracked, heat-aged pickup, and it works as a straightforward ignition sensor swap on these machines.

Built For Performance

  • Direct replacement pickup coil for the Pro-X 600 and Pro-X2 ignition system
  • Wound coil and molded housing built to resist heat cycling under the flywheel
  • Factory-style mounting holes and lead length for simple bolting to the stator plate
  • Delivers a stable trigger pulse to the CDI for consistent spark timing
  • Sealed wiring connector helps keep moisture and oil out of the circuit
  • Drop-in fit for the specified 2001 to 2004 model years

Fits These Machines

  • for Polaris Pro-X 600 (2001-2004)
  • for Polaris Pro-X2 (2001-2004)

On-The-Job Use

  • Replacing a failed pickup that has left the sled with weak or no spark
  • Restoring ignition timing after heat damage to the original sensor
  • Routine ignition diagnosis and repair on Pro-X 600 and Pro-X2 sleds
  • Track-side or shop repair of a no-start condition traced to the stator circuit

Specs At A Glance

Part Number(s) Pro-X 600 / Pro-X2 Ignition Sensor / Pickup Coil
Type Ignition sensor / pickup coil
Fitment Years 2001-2004

Good To Know

Q: How do I know if my pickup coil is bad? A: A failed pickup often shows as no spark, weak spark, or spark that drops out as the engine warms up, and it can be confirmed with a resistance and peak voltage check. Q: Can I install this without pulling the engine? A: On many Pro-X 600 and Pro-X2 sleds the pickup mounts to the stator plate under the flywheel, so access depends on removing the recoil and flywheel first.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.

Get it between -

View full details