Ignition Sensor Pickup Source Coil for Arctic Cat F6 Firecat 600 2007-2011
Ignition Sensor Pickup Source Coil for Arctic Cat F6 Firecat 600 2007-2011
Couldn't load pickup availability
Ignition Sensor (Pickup/Source Coil) for Arctic Cat F6
This ignition sensor, also called a pickup or source coil, delivers the trigger signal that fires the ignition on Arctic Cat F6 snowmobiles from 2007 to 2011 and Firecat 600 models.
Overview
This ignition sensor for Arctic Cat provides the timing signal your engine needs to spark at the right moment. The pickup coil mounts at the flywheel or stator and sends a pulse to the CDI, so a failed sensor means no spark and no start. It suits riders repairing an F6 or Firecat 600 who want a dependable replacement ignition sensor for Arctic Cat machines.
Built For Performance
- Direct-fit pickup and source coil assembly designed for Arctic Cat F6 and Firecat 600 ignition systems
- Wound coil and sealed housing built to handle vibration and temperature swings in a two-stroke engine bay
- Prewired connector ready to plug into the factory harness on listed models
- Provides a clean trigger pulse for consistent spark timing across the rev range
- Drop-in replacement for a failed or intermittent original sensor
Fits These Machines
- for Arctic Cat F6 2007-2011
- for Arctic Cat Firecat 600
On-The-Job Use
- Restoring spark to an F6 that cranks but will not fire
- Fixing an intermittent miss or no-start traced to a weak pickup signal
- Routine ignition service on Firecat 600 sleds
- Trailside or shop replacement of a heat-cycled original sensor
Specs At A Glance
| Part Type | Ignition Sensor (Pickup / Source Coil) |
| Position | Flywheel / stator pickup |
| Fitment | for Arctic Cat F6 2007-2011, Firecat 600 |
Good To Know
Q: How do I know the pickup coil is the problem? A: A no-spark condition with a good stator and CDI often points to a failed pickup or source coil. Testing the sensor's resistance against the service spec confirms whether it has failed.
Q: Does this sensor need any adjustment after install? A: It bolts into the factory location, so air gap and timing stay at the stock setting. Confirm the connector matches your model year before ordering.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
