Intake Air Breather Tube Hose Connector Pipe For Audi VW- 06A 103 213F

Intake Air Breather Tube Hose Connector Pipe for Audi VW

This intake air breather tube hose connector pipe for Audi and VW (OEM cross-reference 06A 103 213F) routes crankcase and intake breather air between the engine and the intake tract, helping keep the system sealed and breathing correctly.

Overview

This intake air breather tube hose connector pipe for Audi VW is a direct-fit replacement for a cracked, brittle, or leaking breather line. It carries crankcase vapor into the intake path and seals against vacuum leaks that cause rough running or check-engine codes. It suits DIY mechanics and shops servicing common 1.8T and 2.0 engine applications.

Built For Performance

• Molded construction shaped to the factory routing for a drop-in fit
• Preformed bends and connector ends that mate with existing intake and breather ports
• Made to resist heat and oil vapor in the crankcase ventilation path
• OEM cross-reference 06A 103 213F for straightforward parts matching

Fits These Machines

• for Audi and VW models equipped with the 06A 103 213F breather tube application

On-The-Job Use

• Replacing a cracked or oil-soaked breather hose that leaks unmetered air
• Restoring crankcase ventilation after an intake or vacuum leak diagnosis
• Routine maintenance on older 1.8T and similar engine bays

Specs At A Glance

Good To Know

Q: Do I need to replace the clamps when fitting this breather tube? A: Reusing the old clamps is common, but fresh spring or worm clamps are worth fitting to keep the connection sealed. Check the hose ends for full seating during installation.

Q: Why replace a breather tube that only looks slightly cracked? A: Small cracks let unmetered air into the intake and often trigger lean codes or rough idle. Replacing the tube restores a sealed crankcase ventilation path.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.