Intake/Exhaust Valve Spring Retainer for Sea-Doo GTI SE 170 1630 2020-2023

Intake/Exhaust Valve Spring Retainer for Sea-Doo

This intake and exhaust valve spring retainer for Sea-Doo is designed for the 1630 engine used in the 2020 to 2023 GTI SE 170, holding valve springs firmly in place on the stem.

Overview

This valve spring retainer for Sea-Doo supports the valvetrain by locking each valve spring onto its valve stem within the 1630 engine. Made for the 2020 to 2023 GTI SE 170, it keeps intake and exhaust valves operating at the spring pressure the engine was built around. A practical replacement part for anyone servicing or rebuilding the cylinder head on a Sea-Doo 1630.

Built For Performance

• Secures intake and exhaust valve springs on the valve stem
• Fits the 1630 engine platform listed for the 2020 to 2023 GTI SE 170
• Engineered to handle sustained high-rpm valvetrain motion
• Supports consistent spring seat pressure and valve timing
• Offered as a replacement valvetrain piece for rebuild and service work

Fits These Machines

• for Sea-Doo GTI SE 170 1630, 2020
• for Sea-Doo GTI SE 170 1630, 2021
• for Sea-Doo GTI SE 170 1630, 2022
• for Sea-Doo GTI SE 170 1630, 2023

Specs At A Glance

Good To Know

Q: Do I need one retainer per valve? A: Each valve typically uses its own retainer, so count the valves on your 1630 engine before ordering. Buying the full set up front keeps a head rebuild moving without extra delays.

Q: Can this be reused from an old head? A: Reused retainers can lose grip over time, so fresh ones are usually fitted during valve service. This helps keep spring tension steady across the entire valvetrain.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.