Skip to product information
1 of 1

Knock Detonation Sensor for Ski-Doo Freeride 800 E-Tec 2012-2017

Knock Detonation Sensor for Ski-Doo Freeride 800 E-Tec 2012-2017

Regular price $136.39
Regular price Sale price $136.39
Sale Sold out
Quantity

Knock/Detonation Sensor for Ski-Doo Freeride 800 E-Tec

The Knock/Detonation Sensor for Ski-Doo Freeride 800 E-Tec detects abnormal combustion in the engine and signals the ECU to adjust timing, protecting your 800 E-Tec from detonation damage.

Overview

This Knock/Detonation Sensor for Ski-Doo Freeride 800 E-Tec is a direct-fit replacement for the factory sensor on 2012-2017 800 E-Tec engines. It detects engine knock and sends the signal your ECU needs to pull timing and protect the powerplant. A must-have for riders maintaining or rebuilding a Freeride 800 E-Tec.

Built For Performance

  • Detects detonation frequencies in the 800 E-Tec combustion chamber
  • Sends knock signal to the ECU for timing correction
  • Direct-fit replacement for the factory Ski-Doo sensor
  • Constructed for the heat and vibration of two-stroke snowmobile engines
  • Restores proper knock sensing after sensor failure or engine rebuild

Fits These Machines

  • for Ski-Doo Freeride 800 E-Tec 2012
  • for Ski-Doo Freeride 800 E-Tec 2013
  • for Ski-Doo Freeride 800 E-Tec 2014
  • for Ski-Doo Freeride 800 E-Tec 2015
  • for Ski-Doo Freeride 800 E-Tec 2016
  • for Ski-Doo Freeride 800 E-Tec 2017

On-The-Job Use

  • Trail riding on 800 E-Tec powered snowmobiles
  • Mountain riding where altitude and load increase knock risk
  • Engine rebuilds where the original knock sensor is reused or damaged
  • Diagnosing check engine codes tied to knock sensor faults

Specs At A Glance

Part Type Knock/Detonation Sensor
Engine 800 E-Tec
Model Years 2012-2017
Vehicle Ski-Doo Freeride

Good To Know

Q: How do I know if my knock sensor has failed? A: Common signs include a check engine light, reduced power, and error codes related to knock sensor circuit faults. A failed sensor can also cause the ECU to default to conservative timing or ignore knock entirely.

Q: Does this sensor require ECU relearning after installation? A: Most 800 E-Tec knock sensors are plug-and-play with the factory connector and do not need special programming. Confirm your specific model year's service procedure before installation.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.

Get it between -

View full details